Trim and finish
A carpentry menu built around trim, doors and cabinets, with framing and repairs for the jobs that come in between.
| Service | What it covers | Typical range | Typical |
|---|---|---|---|
| Crown molding, MDF, installed | Per linear foot, material and labor | $4.00 to $19.00 a foot | $11.50 |
| Crown molding, solid wood, installed | Per linear foot | $6.00 to $42 a foot | $24 |
| Baseboard and casing | Per linear foot | Set your own | |
| Wainscoting and accent walls | Per wall | Set your own |
Doors and cabinets
| Service | What it covers | Typical range | Typical |
|---|---|---|---|
| Interior prehung door, installed | Per door | $365 to $679 a door | $522 |
| Pocket door, installed | Per door | $1,008 to $1,876 a door | $1,442 |
| Cabinet installation only | Per linear foot, customer supplies cabinets | $50 to $200 a foot | $125 |
| Old cabinet removal and haul away | Per kitchen | $325 to $750 a job | $538 |
| Built-in shelves and closets | Per project | Set your own |
Framing and repairs
| Service | What it covers | Typical range | Typical |
|---|---|---|---|
| Wall framing | Per linear foot of wall | Set your own | |
| Rot repair | Sills, trim and fascia | Set your own | |
| Stair and railing repair | Treads, balusters and handrails | Set your own |
How carpenters usually price
Carpenters price trim by the linear foot, doors and cabinets per piece, and framing and repairs by the hour or by the job after a walkthrough.
Our guide on pricing carpentry work walks through it step by step, from your labor rate to the price on the estimate.
Where the ranges come from
6 of the 12 services carry a range. Each one comes from a koira.ai calculator that lists the cost guides behind it and the date they were checked: crown molding cost calculator, interior door installation cost calculator, cabinet installation cost calculator. They are national figures; the calculators scale the labor share to your state's wages when you enter a ZIP.
Lines marked "Set your own" have no range we could source well enough to publish. Price them from your own hours and parts.
What it takes to deliver this menu
The starter kit behind these services: framing hammer, 20 oz milled face; cordless drill and impact driver; cordless circular saw; miter saw on a stand; speed square, framing square and chalk line; 4 ft and 2 ft levels; finish nailer and brad nailer with a small compressor; chisels, block plane and a coping saw; step ladder, 6 ft. The full tools list adds the pro kit and van stock, with maker prices where we could check them.
Turn this into your price list
Edit the prices in the sheet above, print it or download it as a spreadsheet. To use it on real jobs, start a free Koira Office account: your services and prices become the price list your estimates are built from, with signing and a deposit on the same page, and the invoice goes out when the job is done.
Start free on the Office plan. Everything on this page stays free without an account.
Sources
- HomeAdvisor, crown molding installation cost, checked October 9, 2026
- CostHelper, crown molding cost, checked October 9, 2026
- Fixr, crown molding cost, checked October 9, 2026
- HomeAdvisor, ceiling painting cost, checked October 9, 2026
- BLS Occupational Employment and Wage Statistics, May 2025 (state and national files), checked October 8, 2026
- US Census Bureau, 2020 ZIP Code Tabulation Area to county relationship file, checked October 8, 2026
- Fixr, interior door installation cost, checked October 9, 2026
- HomeAdvisor, door installation cost, checked October 9, 2026
- Fixr: Kitchen cabinet installation cost, checked October 9, 2026
- Bob Vila: Cost of kitchen cabinets, checked October 9, 2026
Last checked October 9, 2026. This page is general information, not legal or tax advice. Rules change and differ by state and city, so confirm with the agency named before you act.