- The middle half earn between $23.38 and $32.03 an hour.
- Vermont ranks 34th of the 50 states with published figures for median pay in this trade.
- Vermont pays less than all 3 neighboring states.
- BLS counts about 370 sheet metal workers on payrolls in Vermont.
- At the state median wage, a sheet metal or HVAC business needs to bill about $119.76 an hour on the labor rate calculator's starting numbers.
Sheet Metal Worker pay in Vermont, bottom to top
Sheet metal workers fabricate and install ductwork, flashing, gutters and metal roofing parts, in a shop and on site.
| Pay level | Hourly | Yearly | National hourly |
|---|---|---|---|
| 10th percentile | $20.64 | $42,920 | $18.57 |
| 25th percentile | $23.38 | $48,630 | $22.99 |
| Median | $28.00 | $58,250 | $29.71 |
| 75th percentile | $32.03 | $66,610 | $39.24 |
| 90th percentile | $39.87 | $82,940 | $50.79 |
| Average (mean) | $28.72 | $59,740 | $32.62 |
Pay is bunched up in Vermont. The top tenth earn $39.87 an hour or more, about 1.9 times the $20.64 at the bottom tenth. Nationally that gap is 2.7 times, so the step from the bottom of the scale to the top is shorter here than in most places.
The floor is higher than nationally ($20.64 against $18.57) but the ceiling is lower ($39.87 against $50.79), which squeezes pay toward the middle.
The average, $28.72, is close to the median, so pay sits fairly evenly around the middle.
How Vermont compares with other states
Over a full year, the Vermont median of $58,250 is $3,550 less than the national $61,800.
In the state ranking, Vermont sits 34th, between Wyoming ($28.24) and Colorado ($27.83). The range runs from $22.03 in Arkansas to $47.38 in Washington.
Every one of the neighboring states pays sheet metal workers more than Vermont. The closest is New Hampshire at $28.75, and the biggest gap is with Massachusetts.
BLS wages are not adjusted for living costs. Lower pay often comes with lower housing costs, so the gap in take-home value can be smaller than the gap in wages.
| Neighboring state | Median hourly | Median yearly | Against Vermont |
|---|---|---|---|
| Vermont | $28.00 | $58,250 | |
| Massachusetts | $39.47 | $82,100 | +$11.47 an hour |
| New Hampshire | $28.75 | $59,800 | +$0.75 an hour |
| New York | $35.46 | $73,760 | +$7.46 an hour |
How many sheet metal workers work in Vermont
Vermont has one of the smaller workforces in the trade: 370 sheet metal workers on payrolls, 0.3% of the 119,770 nationwide.
The trade is a bigger part of the local job market than it is nationally: 1.2 of every 1,000 jobs in Vermont, 1.6 times the national share.
What a sheet metal or HVAC business in Vermont should charge
A lower wage helps the price less than you might expect, because the overhead does not shrink with it. Here is a sheet metal or HVAC business in Vermont paying the state median of $28.00, on the labor rate calculator's starting numbers: 40-hour weeks, 10 paid days off, 2 unbilled hours a day, 7.65% payroll taxes, $90,000 a year of overhead and 15% profit.
| Step | Math | Result |
|---|---|---|
| Paid hours | 40 × 52 | 2,080 |
| Hours at work | 2,080 − 10 days × 8 | 2,000 |
| Billable hours | 2,000 × 6 ÷ 8 | 1,500 |
| Labor cost | $28.00 × 2,080 × 1.0765 | $62,695 |
| Break-even rate | ($62,695 + $90,000) ÷ 1,500 | $101.80 |
| Rate with 15% profit | $101.80 ÷ 0.85 | $119.76 |
That is $119.76 per billable hour, 4.3 times the wage, and $3.00 less than the $122.76 the same math gives at the national median wage.
Paying the 75th percentile instead, $32.03 in Vermont, to hire and keep experienced people raises the rate to $126.84.
A cheaper crew saves less than it seems: at the 25th percentile wage of $23.38, the rate only drops to $111.65.
Overhead, at $60 of every billed hour, and the unbilled hours move this rate more than a raise does. A dollar more in wages adds about $1.76 to the rate.
Run it with your own numbers in the labor rate calculator. It is free and shows every step.
Where these numbers come from
Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025.
The figures are the BLS state estimates for SOC 47-2211, sheet metal workers, across all industries, read straight from the May 2025 state data file. They cover wage and salary workers, not the self-employed. Where BLS did not publish a figure, this page leaves it out.
All states in one table: sheet metal worker salary by state.