- The middle half earn between $22.26 and $34.06 an hour.
- New Hampshire ranks 31st of the 50 states with published figures for median pay in this trade.
- New Hampshire pays more than 1 of its 3 neighboring states.
- BLS counts about 760 sheet metal workers on payrolls in New Hampshire.
- At the state median wage, a sheet metal or HVAC business needs to bill about $121.08 an hour on the labor rate calculator's starting numbers.
Sheet Metal Worker pay in New Hampshire, bottom to top
Sheet metal workers fabricate and install ductwork, flashing, gutters and metal roofing parts, in a shop and on site.
| Pay level | Hourly | Yearly | National hourly |
|---|---|---|---|
| 10th percentile | $16.43 | $34,170 | $18.57 |
| 25th percentile | $22.26 | $46,300 | $22.99 |
| Median | $28.75 | $59,800 | $29.71 |
| 75th percentile | $34.06 | $70,840 | $39.24 |
| 90th percentile | $38.43 | $79,930 | $50.79 |
| Average (mean) | $28.46 | $59,190 | $32.62 |
Pay is bunched up in New Hampshire. The top tenth earn $38.43 an hour or more, about 2.3 times the $16.43 at the bottom tenth. Nationally that gap is 2.7 times, so the step from the bottom of the scale to the top is shorter here than in most places.
Both ends trail the national figures. The bottom tenth earn $2.14 an hour less than the bottom tenth nationally, and the top tenth $12.36 less than the national top tenth.
The average wage ($28.46) is a little under the median, so the low end of the range stretches further than the high end in New Hampshire.
How New Hampshire compares with other states
Over a full year the gap to the national median is small: $59,800 in New Hampshire against $61,800 nationally, $2,000 less.
In the state ranking, New Hampshire sits 31st, between Kentucky ($29.17) and Tennessee ($28.45). The range runs from $22.03 in Arkansas to $47.38 in Washington.
Against its neighboring states, New Hampshire is in the middle: Maine and Massachusetts pay more, and Vermont pays less.
| Neighboring state | Median hourly | Median yearly | Against New Hampshire |
|---|---|---|---|
| New Hampshire | $28.75 | $59,800 | |
| Maine | $29.87 | $62,120 | +$1.12 an hour |
| Massachusetts | $39.47 | $82,100 | +$10.72 an hour |
| Vermont | $28.00 | $58,250 | −$0.75 an hour |
How many sheet metal workers work in New Hampshire
About 760 sheet metal workers work on payrolls in New Hampshire, 0.6% of the 119,770 nationwide, the 38th largest count among the states.
The trade is a bigger part of the local job market than it is nationally: 1.1 of every 1,000 jobs in New Hampshire, 1.4 times the national share.
What a sheet metal or HVAC business in New Hampshire should charge
Say you run a sheet metal or HVAC business in New Hampshire and pay the state median of $28.75 an hour. Here is the labor rate calculator's math on its starting numbers: 40-hour weeks, 10 paid days off, 2 unbilled hours a day, 7.65% payroll taxes, $90,000 a year of overhead and 15% profit.
| Step | Math | Result |
|---|---|---|
| Paid hours | 40 × 52 | 2,080 |
| Hours at work | 2,080 − 10 days × 8 | 2,000 |
| Billable hours | 2,000 × 6 ÷ 8 | 1,500 |
| Labor cost | $28.75 × 2,080 × 1.0765 | $64,375 |
| Break-even rate | ($64,375 + $90,000) ÷ 1,500 | $102.92 |
| Rate with 15% profit | $102.92 ÷ 0.85 | $121.08 |
That is $121.08 per billable hour, 4.2 times the wage, and $1.69 less than the $122.76 the same math gives at the national median wage.
Paying the 75th percentile instead, $34.06 in New Hampshire, to hire and keep experienced people raises the rate to $130.40.
A cheaper crew saves less than it seems: at the 25th percentile wage of $22.26, the rate only drops to $109.68.
Overhead, at $60 of every billed hour, and the unbilled hours move this rate more than a raise does. A dollar more in wages adds about $1.76 to the rate.
Run it with your own numbers in the labor rate calculator. It is free and shows every step.
Where these numbers come from
Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025.
The figures are the BLS state estimates for SOC 47-2211, sheet metal workers, across all industries, read straight from the May 2025 state data file. They cover wage and salary workers, not the self-employed. Where BLS did not publish a figure, this page leaves it out.
All states in one table: sheet metal worker salary by state.