- Only 6 states pay welders more at the median.
- New Hampshire pays more than 2 of its 3 neighboring states.
- BLS counts about 1,110 welders on payrolls in New Hampshire.
- At the state median wage, a welding and fabrication shop needs to bill about $123.24 an hour on the labor rate calculator's starting numbers.
Welder pay in New Hampshire, bottom to top
BLS counts welders, cutters, solderers and brazers as one group. It covers people who join or cut metal with welding, cutting, soldering and brazing equipment, by hand or on machines, in shops, plants and on job sites.
| Pay level | Hourly | Yearly | National hourly |
|---|---|---|---|
| 10th percentile | $22.86 | $47,540 | $18.87 |
| 25th percentile | $24.34 | $50,620 | $22.50 |
| Median | $29.98 | $62,360 | $25.84 |
| 75th percentile | $35.78 | $74,420 | $30.29 |
| 90th percentile | $38.60 | $80,290 | $37.28 |
| Average (mean) | $30.24 | $62,900 | $27.29 |
Pay is bunched up in New Hampshire. The top tenth earn $38.60 an hour or more, about 1.7 times the $22.86 at the bottom tenth. Nationally that gap is 2 times, so the step from the bottom of the scale to the top is shorter here than in most places.
Both ends of the scale beat the national figures: $22.86 against $18.87 at the bottom tenth, and $38.60 against $37.28 at the top.
The average, $30.24, is close to the median, so pay sits fairly evenly around the middle.
How New Hampshire compares with other states
Over a full year, the New Hampshire median of $62,360 is $8,610 more than the national $53,750.
In the state ranking, New Hampshire sits 7th, between Massachusetts ($30.08) and Louisiana ($29.93). The range runs from $23.06 in Arkansas to $38.87 in Alaska.
Against its neighboring states, New Hampshire is in the middle: Massachusetts pays more, and Maine and Vermont pay less.
These are wages as paid, not adjusted for what it costs to live in New Hampshire. Rent, home prices and taxes decide how far a higher wage goes.
Every state ranked, with the national pay range: national welder salary by state.
| Neighboring state | Median hourly | Median yearly | Against New Hampshire |
|---|---|---|---|
| New Hampshire | $29.98 | $62,360 | |
| Maine | $29.92 | $62,220 | −$0.06 an hour |
| Massachusetts | $30.08 | $62,570 | +$0.10 an hour |
| Vermont | $29.27 | $60,890 | −$0.71 an hour |
How many welders work in New Hampshire
About 1,110 welders work on payrolls in New Hampshire, 0.3% of the 416,210 nationwide, the 46th largest count among the states.
It is a smaller part of local jobs than in most of the country, at 1.6 per 1,000 jobs, 0.61 times the national share.
What a welding and fabrication shop in New Hampshire should charge
Higher wages in New Hampshire go straight into the price. Take a welding and fabrication shop in New Hampshire paying the state median of $29.98 and run it through the labor rate calculator with its starting numbers (40-hour weeks, 10 paid days off, 2 unbilled hours a day, 7.65% payroll taxes, $90,000 a year of overhead and 15% profit).
| Step | Math | Result |
|---|---|---|
| Paid hours | 40 × 52 | 2,080 |
| Hours at work | 2,080 − 10 days × 8 | 2,000 |
| Billable hours | 2,000 × 6 ÷ 8 | 1,500 |
| Labor cost | $29.98 × 2,080 × 1.0765 | $67,129 |
| Break-even rate | ($67,129 + $90,000) ÷ 1,500 | $104.75 |
| Rate with 15% profit | $104.75 ÷ 0.85 | $123.24 |
That is $123.24 per billable hour, 4.1 times the wage, and $7.27 more than the $115.97 the same math gives at the national median wage.
Paying the 75th percentile instead, $35.78 in New Hampshire, to hire and keep experienced people raises the rate to $133.42.
A cheaper crew saves less than it seems: at the 25th percentile wage of $24.34, the rate only drops to $113.33.
Overhead, at $60 of every billed hour, and the unbilled hours move this rate more than a raise does. A dollar more in wages adds about $1.76 to the rate.
Run it with your own numbers in the labor rate calculator. It is free and shows every step.
Working as a welder in New Hampshire
- Running the business. Quotes, invoices, booking and your website in one place: how welding and fabrication shops run on Koira.
- Getting found. The free Koira report checks how your business shows up in search and on maps against shops near you.
Where these numbers come from
Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025.
The figures are the BLS state estimates for SOC 51-4121, welders, cutters, solderers, and brazers, across all industries, read straight from the May 2025 state data file. They cover wage and salary workers, not the self-employed. Where BLS did not publish a figure, this page leaves it out.
All states in one table: welder salary by state.