- The middle half earn between $37.40 and $50.70 an hour.
- Only 1 state pays sheet metal workers more at the median.
- Hawaii pays more than both nearby states it is compared with.
- BLS counts about 490 sheet metal workers on payrolls in Hawaii.
- At the state median wage, a sheet metal or HVAC business needs to bill about $151.93 an hour on the labor rate calculator's starting numbers.
Sheet Metal Worker pay in Hawaii, bottom to top
Sheet metal workers fabricate and install ductwork, flashing, gutters and metal roofing parts, in a shop and on site.
| Pay level | Hourly | Yearly | National hourly |
|---|---|---|---|
| 10th percentile | $25.35 | $52,730 | $18.57 |
| 25th percentile | $37.40 | $77,790 | $22.99 |
| Median | $46.32 | $96,350 | $29.71 |
| 75th percentile | $50.70 | $105,460 | $39.24 |
| 90th percentile | $57.19 | $118,960 | $50.79 |
| Average (mean) | $43.90 | $91,310 | $32.62 |
Pay is bunched up in Hawaii. The top tenth earn $57.19 an hour or more, about 2.3 times the $25.35 at the bottom tenth. Nationally that gap is 2.7 times, so the step from the bottom of the scale to the top is shorter here than in most places.
Both ends of the scale beat the national figures: $25.35 against $18.57 at the bottom tenth, and $57.19 against $50.79 at the top.
The average wage ($43.90) is a little under the median, so the low end of the range stretches further than the high end in Hawaii.
How Hawaii compares with other states
Over a full year, the Hawaii median of $96,350 is $34,550 more than the national $61,800.
In the state ranking, Hawaii sits 2nd, between Washington ($47.38) and Alaska ($45.48). The range runs from $22.03 in Arkansas to $47.38 in Washington.
Hawaii has no land border, so it is set here against California and Alaska. Hawaii pays more than both.
These are wages as paid, not adjusted for what it costs to live in Hawaii. Rent, home prices and taxes decide how far a higher wage goes.
| Nearby state | Median hourly | Median yearly | Against Hawaii |
|---|---|---|---|
| Hawaii | $46.32 | $96,350 | |
| California | $36.82 | $76,590 | −$9.50 an hour |
| Alaska | $45.48 | $94,600 | −$0.84 an hour |
How many sheet metal workers work in Hawaii
About 490 sheet metal workers work on payrolls in Hawaii, 0.4% of the 119,770 nationwide, the 41st largest count among the states.
That is 0.8 of every 1,000 jobs in Hawaii, close to the trade's share of jobs nationally.
What a sheet metal or HVAC business in Hawaii should charge
Higher wages in Hawaii go straight into the price. Take a sheet metal or HVAC business in Hawaii paying the state median of $46.32 and run it through the labor rate calculator with its starting numbers (40-hour weeks, 10 paid days off, 2 unbilled hours a day, 7.65% payroll taxes, $90,000 a year of overhead and 15% profit).
| Step | Math | Result |
|---|---|---|
| Paid hours | 40 × 52 | 2,080 |
| Hours at work | 2,080 − 10 days × 8 | 2,000 |
| Billable hours | 2,000 × 6 ÷ 8 | 1,500 |
| Labor cost | $46.32 × 2,080 × 1.0765 | $103,716 |
| Break-even rate | ($103,716 + $90,000) ÷ 1,500 | $129.14 |
| Rate with 15% profit | $129.14 ÷ 0.85 | $151.93 |
That is $151.93 per billable hour, 3.3 times the wage, and $29.17 more than the $122.76 the same math gives at the national median wage.
Paying the 75th percentile instead, $50.70 in Hawaii, to hire and keep experienced people raises the rate to $159.63.
At this wage the pay itself is the biggest part of the price, so every raise shows up in the rate: a dollar more an hour adds about $1.76 per billed hour.
Run it with your own numbers in the labor rate calculator. It is free and shows every step.
Where these numbers come from
Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025.
The figures are the BLS state estimates for SOC 47-2211, sheet metal workers, across all industries, read straight from the May 2025 state data file. They cover wage and salary workers, not the self-employed. Where BLS did not publish a figure, this page leaves it out.
All states in one table: sheet metal worker salary by state.