How much does crown molding installation cost?

What crown molding installation costs across the US and in your state, what pushes the price up or down, and the published guides behind every number.

$2,250Typical, US
$1,300 to $3,050Usual range
2 guidesCombined, sources below

The figures above are the guides' range for a typical job. The calculator prices your exact job, line by line, from the same guides.

linear ft
A 12 by 12 room is about 48 linear feet.
Adjusts labor to your state's wages.
Crown molding installation cost
$400 to $1,900
Typical $1,150 (US average)
$11.50Per linear ft, all in, typical
$400Low
$1,900High
Free. Your numbers become an estimate you can send from your phone.

How we got this

  1. MDF (paint grade), installed$4.00 to $19.00 a linear ft (typical $11.50)Labor $3 to $12 a linear foot plus mdf (paint grade) molding $1 to $7 (HomeAdvisor).
  2. Length100 linear ftLow, typical and high each times 100.
  3. RegionUS average prices (no ZIP entered)Enter a ZIP to scale the labor part of the price to your state's wages.
  4. Total$400 to $1,900, typical $1,150
ItemQtyLowTypicalHigh
MDF (paint grade) crown molding, installed100 linear ft$400$1,150$1,900
Total$400$1,150$1,900

Sources: HomeAdvisor, crown molding installation cost; CostHelper, crown molding cost; Fixr, crown molding cost; HomeAdvisor, ceiling painting cost; BLS Occupational Employment and Wage Statistics, May 2025 (state and national files); US Census Bureau, 2020 ZIP Code Tabulation Area to county relationship file. Checked 2026-10-09.

Quick answer
  • Crown molding installation usually costs $1,300 to $3,050, about $2,250 typical.
  • Crown molding run around one or two rooms, cut, installed, caulked and painted or stained.
  • Price your own job with the calculator above; it breaks the job into lines.

What crown molding installation costs

Crown molding installation usually runs $1,300 to $3,050. A typical job lands near $2,250. Crown molding run around one or two rooms, cut, installed, caulked and painted or stained. By the linear foot, HomeAdvisor put it at $4 to $23, with $13.50 in the middle.

Crown molding installation, US, combined from Fixr and HomeAdvisor
Price
Low end$1,300
Typical$2,250
High end$3,050
Per linear foot$4 to $23

National figures from Fixr and HomeAdvisor, combined as shown below. Labor rates move the price by state: about $2,769 typical in Hawaii against $1,940 in Arkansas.

What drives the price

  • Material. MDF and polyurethane are the budget choices. Paint-grade pine sits in the middle. Stain-grade oak and exotic hardwoods cost the most.
  • Profile. Wide, built-up crown with several pieces costs more to buy and to install. HomeAdvisor puts custom crown at about $15 to $20 a linear foot.
  • Corners and walls. Many corners, vaulted ceilings and walls that are out of square slow the work. CostHelper notes uneven walls and irregular layouts raise the price.
  • Finish. Painting or staining in place adds labor.

Crown molding installation cost by state

Estimates by state, made by Koira: the national crown molding installation range with its labor part, roughly 60%, adjusted to local wages for construction and extraction workers. Real quotes vary with the job.

Crown molding installation by state, Koira estimates
StateLowTypicalHigh
Alabama$1,146$1,984$2,689
Alaska$1,511$2,614$3,544
Arizona$1,280$2,216$3,003
Arkansas$1,121$1,940$2,629
California$1,459$2,525$3,423
Colorado$1,322$2,287$3,100
Connecticut$1,458$2,524$3,421
Delaware$1,298$2,246$3,044
District of Columbia$1,438$2,490$3,375
Florida$1,167$2,019$2,737
Georgia$1,172$2,029$2,750
Hawaii$1,600$2,769$3,754
Idaho$1,256$2,173$2,946
Illinois$1,575$2,727$3,696
Indiana$1,330$2,302$3,121
Iowa$1,299$2,248$3,047
Kansas$1,240$2,146$2,909
Kentucky$1,216$2,105$2,853
Louisiana$1,174$2,032$2,755
Maine$1,310$2,267$3,074
Maryland$1,304$2,258$3,060
Massachusetts$1,535$2,656$3,601
Michigan$1,322$2,287$3,100
Minnesota$1,471$2,546$3,451
Mississippi$1,133$1,961$2,658
Missouri$1,329$2,300$3,117
Montana$1,319$2,282$3,093
Nebraska$1,225$2,119$2,873
Nevada$1,329$2,300$3,117
New Hampshire$1,307$2,262$3,067
New Jersey$1,482$2,565$3,478
New Mexico$1,174$2,031$2,753
New York$1,442$2,496$3,384
North Carolina$1,167$2,020$2,738
North Dakota$1,321$2,287$3,100
Ohio$1,334$2,309$3,130
Oklahoma$1,157$2,002$2,714
Oregon$1,386$2,399$3,252
Pennsylvania$1,313$2,272$3,080
Rhode Island$1,346$2,329$3,157
South Carolina$1,169$2,024$2,743
South Dakota$1,177$2,036$2,760
Tennessee$1,182$2,045$2,773
Texas$1,164$2,015$2,731
Utah$1,269$2,196$2,976
Vermont$1,302$2,254$3,056
Virginia$1,259$2,180$2,955
Washington$1,509$2,612$3,540
West Virginia$1,275$2,206$2,991
Wisconsin$1,354$2,343$3,176
Wyoming$1,303$2,255$3,056

Big metro areas often run above their state's figure.

How we got these numbers

GuideRangeAverageUse
Fixr$2,000 to $4,000$3,150Counted
HomeAdvisor$609 to $2,125$1,302Counted

How the crown molding installation range is combined: low end from the middle of the guides' lows, high end from the middle of their highs, typical from the middle of their averages (a range's midpoint where no average is given). Figures read on each guide's page on October 9, 2026.

Labor share used: 60%. HomeAdvisor puts professional installation at $3 to $12 a linear foot against $1 to $15 for most material, so labor is the larger part. The share is Koira's assumption. State factor: the state's median hourly wage for construction and extraction workers over the national $28.63 (BLS, May 2025), kept between 0.7 and 1.4.

For contractors: price this job in Koira

Wall and ceiling work is mostly labor, so price it from your own hourly cost and show the square or linear feet on the estimate.

Run the numbers for a real crown molding installation in the free crown molding cost calculator, then save the result as an estimate. With Koira's free Office plan, the crown molding installation estimate, the deposit and the final invoice live in one place, sent by text. See estimates. Price this job in Koira, free.

Sources: Fixr, crown molding installation cost; HomeAdvisor, crown molding installation cost; CostHelper, crown molding installation cost; BLS Occupational Employment and Wage Statistics, May 2025 (state and national files). Prices checked October 9, 2026. More for your trade: how the trade runs on Koira.

FAQ

How much does crown molding installation cost?

Crown molding installation usually costs $1,300 to $3,050, with $2,250 typical. Crown molding run around one or two rooms, cut, installed, caulked and painted or stained.

How much does crown molding cost per room?

CostHelper puts standard crown at about $300 to $500 for a 10 by 10 foot room, installed.

How much is crown molding per foot installed?

HomeAdvisor says $4 to $23 a linear foot with material and labor.

Where does crown molding installation cost the most?

Hawaii is highest in Koira's state estimates, about $2,769 typical, and Arkansas is lowest at about $1,940. Only labor is scaled by state.

How much of a crown molding installation price is labor?

About 60% in these estimates. HomeAdvisor puts professional installation at $3 to $12 a linear foot against $1 to $15 for most material, so labor is the larger part. The share is Koira's assumption.

We know what works. Leave it to Koira.

☼⚙
Standard⚡ Turbo
● Koira did it● You by hand
Today $9,300$8,100 / $1,200
This week $25,050$18,570 / $6,480
This month $69,300$46,150 / $23,150
Money, just now
Reminded Sean Love, $1,850. Polite reminder with the pay link.
Bids, 9:44 am
Nudged Dana on the kitchen bid. Day 3 follow up. She opened it at 9:12.
Convos, 9:41 am
Texted back a missed call. Walk through booked Thu 10:00.
Crown molding installation Cost: Typical Prices by State | Koira