How to get a general contractor license in Washington

Washington requires every construction contractor to register with the Department of Labor and Industries (L&I) and to carry a bond and insurance before bidding or working. It is a registration, with no state exam in the steps.

PartlyState license for some work, or a registration
2License types to choose from
2Exams to pass
2 yearsBetween renewals
The short version for Washington
  • A single job under $500 for labor and materials that is casual, minor or inconsequential is exempt, but not if it is part of a larger job, split up to avoid registering, or if you advertise as a contractor.
  • L&I's registration steps do not list an experience requirement.
  • Plan for a trade exam and a business and law exam.
  • $30,000 surety bond for a general contractor.
  • Every two years. The state law says a registration is good for two years and must be renewed by the expiration date.

Do you need a state license in Washington?

Washington licenses some general contractor work at the state level and leaves the rest alone. Which side of that line a job falls on decides whether you need the state license.

A single job under $500 for labor and materials that is casual, minor or inconsequential is exempt, but not if it is part of a larger job, split up to avoid registering, or if you advertise as a contractor.

Plumbing, electrical, elevator, boiler, manufactured home and asbestos work carry their own state licenses on top of contractor registration.

Washington license types for general contractor work

Washington splits the work into 2 licenses. Pick the one that matches the jobs you take, since working outside its scope is the same as working without one.

LicenseWhat it covers
General contractorMost kinds of construction work, and may hire subcontractors in any specialty
Specialty contractorOnly the registered specialty, and may not hire subcontractors

Steps to get licensed in Washington

  1. Get a UBI number by registering your business with the Washington Department of Revenue.
  2. Buy general liability insurance at the required limits and have the certificate sent to L&I.
  3. Buy a $30,000 contractor bond from a surety.
  4. Fill out the notarized L&I contractor registration application as a general contractor.
  5. Pay the $150.20 registration fee and file the bond and insurance with L&I.
  6. Renew every two years before the registration expires.

Experience and other requirements

Experience. L&I's registration steps do not list an experience requirement.

The license to apply for. General contractor registration (L&I).

Washington general contractor exams

Trade exam. L&I's registration steps do not include an exam.

Business and law exam. L&I's registration steps do not include a business and law exam.

What it costs in Washington

The board lists 3 fees along the way. These are the state's own numbers. Insurance, any bond, exam prep and your business registration come on top.

FeeAmount
Registration fee$150.20
Renewal fee$150.20
Reinstatement fee$70.90

Insurance and bond

Insurance. General liability of $200,000 public liability and $50,000 property damage, or $250,000 combined single limit, with a certificate on file at L&I.

Bond. $30,000 surety bond for a general contractor.

Renewal and licenses from other states

Renewal. Every two years. The state law says a registration is good for two years and must be renewed by the expiration date.

Reciprocity. The official pages we read do not say. Check with the board (official site).

Good to know in Washington

  • You need a Uniform Business Identifier (UBI) number from the Department of Revenue as part of registering.
  • The application has to be notarized.

After you are licensed

The license lets you take the work. Getting the work is the next job.

  • Register the business. If you work under a name other than your own, register it where your state asks (often the Secretary of State, sometimes the county), and keep the name the same on your license, your truck and your invoices.
  • Claim your Google Business Profile. It is the listing people see when they search for a contractor near them. Fill in your service area, hours and real photos of your work.
  • Put up a website that shows the license. Customers look for it before they call. Koira builds a contractor website for you and keeps it current.
  • See where you stand. The free Koira report checks how your business shows up in search and on maps against shops near you.

Where this comes from

Every fact on this page comes from the Washington State Department of Labor and Industries (L&I), Contractor Registration and the official pages below, checked October 8, 2026. Fees and rules change, so confirm with the board before you file.

FAQ

Do you need a state general contractor license in Washington?

Washington requires every construction contractor to register with the Department of Labor and Industries (L&I) and to carry a bond and insurance before bidding or working. It is a registration, with no state exam in the steps. Plumbing, electrical, elevator, boiler, manufactured home and asbestos work carry their own state licenses on top of contractor registration.

Can you do small jobs in Washington without a license?

A single job under $500 for labor and materials that is casual, minor or inconsequential is exempt, but not if it is part of a larger job, split up to avoid registering, or if you advertise as a contractor.

How much does a general contractor license cost in Washington?

The fees the board lists: registration fee, $150.20; renewal fee, $150.20; reinstatement fee, $70.90. Insurance, a bond if one applies, and exam prep cost extra.

What exams do you take for a general contractor license in Washington?

L&I's registration steps do not include an exam. L&I's registration steps do not include a business and law exam.

How much experience do you need in Washington?

L&I's registration steps do not list an experience requirement.

How often do you renew in Washington?

Every two years. The state law says a registration is good for two years and must be renewed by the expiration date.

Who issues general contractor licenses in Washington?

The Washington State Department of Labor and Industries (L&I), Contractor Registration. Its site is the place to check current forms and fees before you apply.

We know what works. Leave it to Koira.

☼⚙
Standard⚡ Turbo
● Koira did it● You by hand
Today $9,300$8,100 / $1,200
This week $25,050$18,570 / $6,480
This month $69,300$46,150 / $23,150
Money, just now
Reminded Sean Love, $1,850. Polite reminder with the pay link.
Bids, 9:44 am
Nudged Dana on the kitchen bid. Day 3 follow up. She opened it at 9:12.
Convos, 9:41 am
Texted back a missed call. Walk through booked Thu 10:00.
How to Get a General Contractor License in Washington (2026 Requirements)